[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: wireless transmitter/receiver

From: jim ruxton   cinetronpassport.ca
Date: Tue, 7 Feb 2006 12:25:41 -0800

A! Sent via the Art & Robotics Group mailing list: arg-list@xxxxxxxxxxxxxxx
R! Use your "Reply All" to  reply to the list, "Reply" for private response
G!

I'll second Nick's recommendation and suggest Linx devices as well
available at DigiKey http://www.linxtechnologies.com/
jim
> Hi Sandor,
> Check out abacom for RF <www.abacom-tech.com>. They're affordable,
> have good support and are located in Toronto. You can pay more and get
> modules that take RS232 in and simply put it out the other side, or
> you can assemble the circuits yourself and save a few bucks.
> best,
> nick
> 
> On 2/7/06, Sandor Ajzenstat <sandor@xxxxxxxxxxxx> wrote:
>         Hi everyone,
>          
>         I'm looking for a circuit to serially transmit a byte of data
>         by radio frequency, around 6 feet minimum, to a receiver where
>         it is turned back into a serial digital byte.  This is for
>         remote control of a sculpture that I don't want to connect
>         wires to.  If anyone has ideas, or can point me in a
>         direction, please let me know.
>          
>         Thanks for your time.
>         Take care,
>         Sandor Ajzenstat
>          
>          
>          
>          
> 


A!
R!      messages saved at http://www.interaccess.org/arg/arg-list.html
G!      unsubscribe/help requests to mailto:Majordomo@xxxxxxxxxxxxxxx