[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Fwd: circuit needed for servo motor]

From: Jeff Mann   jefmanutcc.utoronto.ca
Date: Thu, 8 Jun 2000 12:59:41 -0700

A! Sent via the Art & Robotics Group mailing list: arg-list@xxxxxxxxxxxxxxx
R! Use your "Reply All" to  reply to the list, "Reply" for private response
G!

Hi - this message was sent by "sjuy" <wcuy@xxxxxxxx> - please reply to
her or the list, not to me. <Jeff

-----------------------

hello!

i am sandra and i'm a student from the philippines.  i'm doing a project =
that would need the help of a servo motor to drive a lead screw.  this =
motor is to be used for industrial use.  i found a motor with a power of =
180 watts.  my problem is how to drive this motor.  i thought of using =
LM629 but i need help in building a circuit for this.  this controller =
would be interfaced with the computer's parallel port.  any help would =
be appreciated.

thanks and you can e-mail me at wcuy@xxxxxxxxx

sandra

A!
R!      messages saved at http://www.interaccess.org/arg/arg-list.html
G!      unsubscribe/help requests to mailto:Majordomo@xxxxxxxxxxxxxxx