Art Interface Device logo   Project description  Development   Mailing List  Contact


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AID: Agenda for February 15th 2004

From: B. Bogart   benekran.org
Date: Thu, 12 Feb 2004 14:25:52 -0800

: Sent via the Art Interface Device mailing list: aid@interaccess.org
: Use your "Reply All" to  reply to the list, "Reply" for private response

Agenda:
 
AID group meeting, February 15th, 2004 at 1:30pm @ Interaccess, 401 
Richmond, Suite 444
 
In-Meeting Tasks:

  1) Work on USB Integration into mainboard.
  Participants: Mike, Rob
  Progress: Will give it another shot, if not realized by this meeting 
will be deffered.

  2) Talk about Stefan's dev-kit and "worked solution" structural ideas.
  Participants: everyone

  3) Plan out the "Getting started" guide for AID:
      - How to get a chip programmer? Links to schematics/manufacturers.
      - How to build a programmer?  
      - Construction notes (tools, solder tips, external resources)
      - Part and tool suppliers.
      - How to build a mainboard?
      - How to build a test-board?
      - standalone AID test application(s) How to make these 
multi-platform?
      - links to worked solution pages (on community site)
  Participants: everyone

  3) Continue the development of the AID community site.
      - Is the task list sufficient?  
  Participants: Ian, Tim, Mike, those interested.

  4) Continue work on individual responsibilities.
  Participants: everyone

Between-Meeting Tasks:

  1) Complete mainboard PCB Design.
  Participants: Rob, etc.
  Progress: n/a

  2) Revised Mainboard and Peripheral Schematics
  Participants: Rob, etc.
  Progress: Pelimenary shematics already online!

  3) Six Worked solutions for the AID launch:
      - Switch Reader (Ben's Responsibility)
      - A/D Bend Sensor (John's Responsibility)
      - Polaroid Rangfinder (Rob's responsibility)
      - Sensbar-120V relay box (Mike's responsibility)
      - Audio/Video Playback (Ben's responsibility)
      - Motor Driver (Yeshua's responsibility)

  3) Revise and fix existing boards for AID Demos
      - sensebar
      - stelarc switch reader
      - PD video playback patch
      - Bend Sensor board
      - Rangefinder

Deffered Tasks: (Post-Launch)
 
  1) Continue development of map command (change to 16x16 bit array?).
  Participants: Stefan, Ian, Ben
  Progress: n/a

  2) Implement bulk write command. (requires 16 arguments)
  Participants: Stefan.  
  Progress: n/a

  3) Modify the AtoD on AID to full 10bits!
  Participants: Ben, Stefan
  Progress: We're now using the 8 most siginificant bits of the reading.
 
What we need help with:

   Please take a look at the AID task list:
   http://student.ocad.on.ca/~create/aid/aiddrupal/?q=forum/49

   If you are inclined to any of these tasks please and a comment to 
that forum
   and let us know what aspect you will take on. Post progress and 
results to
   the forum as well.

   * Anyone will enthusiasm, administrative and/or technical skills to 
help us plan
      the AID launch in a short period of a weeks!  
 
AID is an open participation collaborative project. Please join us on
February 15th from 1:30pm to 5:00pm at InterAccess if you are interested in
helping with:
 
* Designing PCBs
* Adding USB support to AID
* Developing a dynamic AID comunity site.
* Development of the AID Dev Kit.
* Planning the AID launch event!  
 
Or, if you are just curious, feel welcome to come and visit.



:      messages saved at http://www.interaccess.org/aid/list
:      unsubscribe/help requests to mailto:Majordomo@interaccess.org